Premium Tyre & Trim Gel (Thick)

Bulk supply

Premium Tyre & Trim Gel (Thick)

£1,162.07

4 for 3 on 200L drums

Your basket is empty

  • Made to order in 14 days
  • Pallet delivery to UK mainland, price shown in your basket
  • Safety Data Sheet and CLP label included

About this product

Premium Tyre & Trim Gel (Thick) Sling-Free High-Gloss Dressing

Our Premium Tyre & Trim Gel is a solvent-rich, high-viscosity dressing that restores depth of colour and delivers a durable, water-repellent gloss to tyres, exterior plastics and rubber seals. The non-slump gel stays exactly where you apply it, eliminating sling even on low-profile or high-speed tyres.

Performance Highlights

Attribute Benefit
Thick gel matrix Clings to vertical surfaces; precise application with foam applicator pads.
Deep, wet-look finish Rejuvenates faded rubber and textured plastics for up to four weeks per coat.
Hydrocarbon carrier system Promotes rapid curing and strong water beading without greasy residue.
UV & ozone inhibitors Helps prevent cracking and colour fade caused by sunlight and environmental stress.
Sling-free formula High-adhesion polymers lock the dressing to the sidewall—no mess on paintwork.

Typical Physical Data*

Appearance Clear to light amber viscous gel
Odour Mild solvent / hydrocarbon
Relative density (20 °C) ≈ 0.86 g mL-1
Flash point (closed cup) > 65 °C
pH Not applicable (non-aqueous)
Transport classification Not regulated

*Typical values; subject to normal manufacturing tolerances.

Application Guidelines

  1. Clean & dry the tyre or trim surface thoroughly.
  2. Apply a small amount of gel onto a foam or microfibre applicator.
  3. Spread evenly, working the product into textured areas.
  4. Buff off excess after 5 minutes with a clean towel to ensure a uniform finish.
  5. Layer for added depth; allow 10 minutes between coats.

Packaging & Storage

Supplied in 1 L, 5 L, 25 L, 200 L and 1 000 L IBC containers.
Store locked and upright at 5–30 °C away from direct sunlight. Shelf life: 24 months from manufacture date.

Safety & Regulatory

Classified under UK-CLP as Aspiration Hazard 1 (H304) — may be fatal if swallowed and enters airways.
Keep out of reach of children. Wear nitrile gloves when handling. Do not ingest; if swallowed, do not induce vomiting seek immediate medical advice. Dispose of applicators/cloths and empty containers in accordance with local regulations. Consult the current Safety Data Sheet (SDS) for full first-aid, spillage and disposal guidance.

For technical support, bulk supply or private-label enquiries, please contact the Innovation Chem technical service team.

Buying in bulk

Pack sizes200 litre drum, 1000 litre IBC
Colour and scentYour choice at no extra cost
Lead timeMade to order in 14 days
DocumentsSafety Data Sheet and CLP label supplied
Made inUnited Kingdom

Want it under your own label?

This formula is also available filled into 500ml to 25 litre packs with your branding.

Private label this product →

Premium Tyre & Trim Gel (Thick) in bulk: common questions

Can I choose the colour and scent?

Yes. Pick from our stocked dyes and from mango, bubblegum, cherry, watermelon or lemon. Leave both on Standard and we make it to our usual specification.

How long does delivery take?

Bulk products are made to order. Typical lead time is 14 days, delivered on a pallet to UK mainland addresses.

How does 4 for 3 work?

Add any four 200 litre drums to your basket, in any mix of products, and the cheapest one is free.

Do you supply a Safety Data Sheet?

Yes. A Safety Data Sheet and CLP compliant label are supplied with every order at no extra cost.

Can I get a sample first?

Yes. Ask for a sample pack and the cost is credited against your first drum or IBC.

Innovation Chem

Premium Tyre & Trim Gel (Thick)

Size
Regular price £34.28

Premium Tyre & Trim Gel (Thick) Sling-Free High-Gloss Dressing

Our Premium Tyre & Trim Gel is a solvent-rich, high-viscosity dressing that restores depth of colour and delivers a durable, water-repellent gloss to tyres, exterior plastics and rubber seals. The non-slump gel stays exactly where you apply it, eliminating sling even on low-profile or high-speed tyres.

Performance Highlights

Attribute Benefit
Thick gel matrix Clings to vertical surfaces; precise application with foam applicator pads.
Deep, wet-look finish Rejuvenates faded rubber and textured plastics for up to four weeks per coat.
Hydrocarbon carrier system Promotes rapid curing and strong water beading without greasy residue.
UV & ozone inhibitors Helps prevent cracking and colour fade caused by sunlight and environmental stress.
Sling-free formula High-adhesion polymers lock the dressing to the sidewall—no mess on paintwork.

Typical Physical Data*

Appearance Clear to light amber viscous gel
Odour Mild solvent / hydrocarbon
Relative density (20 °C) ≈ 0.86 g mL-1
Flash point (closed cup) > 65 °C
pH Not applicable (non-aqueous)
Transport classification Not regulated

*Typical values; subject to normal manufacturing tolerances.

Application Guidelines

  1. Clean & dry the tyre or trim surface thoroughly.
  2. Apply a small amount of gel onto a foam or microfibre applicator.
  3. Spread evenly, working the product into textured areas.
  4. Buff off excess after 5 minutes with a clean towel to ensure a uniform finish.
  5. Layer for added depth; allow 10 minutes between coats.

Packaging & Storage

Supplied in 1 L, 5 L, 25 L, 200 L and 1 000 L IBC containers.
Store locked and upright at 5–30 °C away from direct sunlight. Shelf life: 24 months from manufacture date.

Safety & Regulatory

Classified under UK-CLP as Aspiration Hazard 1 (H304) — may be fatal if swallowed and enters airways.
Keep out of reach of children. Wear nitrile gloves when handling. Do not ingest; if swallowed, do not induce vomiting seek immediate medical advice. Dispose of applicators/cloths and empty containers in accordance with local regulations. Consult the current Safety Data Sheet (SDS) for full first-aid, spillage and disposal guidance.

For technical support, bulk supply or private-label enquiries, please contact the Innovation Chem technical service team.