Fallout Remover

Bulk supply

Fallout Remover

£822.28

4 for 3 on 200L drums

Your basket is empty

  • Made to order in 14 days
  • Pallet delivery to UK mainland, price shown in your basket
  • Safety Data Sheet and CLP label included

About this product

Colour‑Changing Fallout Remover; Reactive Iron Decontamination Gel

Our Colour‑Changing Fallout Remover targets and dissolves embedded ferrous particles (brake dust, rail dust, industrial fallout) on paintwork, wheels and glass. The reactive sulfur‑based chemistry converts iron contamination into a water‑soluble complex, turning the product a vivid purple as it works, a clear visual cue that the surface is ready to rinse.

Performance Highlights

Attribute Benefit
Active colour‑change indicator Turns clear to deep purple on contact with iron, showing exactly when decontamination is complete.
pH‑balanced (4 – 5) Acid‑free and safe on clear‑coat, alloys, plastics and glass when used as directed.
Low‑mist, clinging formula Stays where you spray, ideal for vertical panels and intricate wheel designs.
Odour‑controlled Reduced sulfur odour versus conventional thioglycolate systems, making workshop use more pleasant.
Non‑corrosive to metals (finished surfaces) Optimised inhibitor package prevents flash‑rusting on bare steel rotors.

Typical Physical Data*

Appearance Clear to slightly hazy colourless liquid
Odour Pungent (low‑sulfur)
pH (20 °C) 4.3 – 5.5
Density Approx. 1.06 g mL‑1
Transport classification Not regulated

*Values are typical and may vary within normal manufacturing tolerances.

Application Guidelines

  1. Pre‑clean Wash loose dirt from the surface; work on a cool panel out of direct sunlight.
  2. Apply Spray evenly over the area; product will begin to react within 15–30 seconds.
  3. Dwell Allow 2–5 minutes for full colour change. Do not let the product dry.
  4. Agitate (optional) Use a soft detailing brush on heavily contaminated wheels.
  5. Rinse  Thoroughly pressure‑rinse to remove all residue, then proceed with finishing steps.

Packaging & Storage

Supplied in 1 L, 5 L, 25 L, 200 L and 1 000 L IBC containers.
Store sealed at 5–30 °C out of direct sunlight. Shelf life: 24 months from manufacture date.

Safety & Regulatory

Classified under UK‑CLP as Acute Toxicity 4 (H302)  harmful if swallowed and Skin Sensitiser 1A (H317)  may cause an allergic skin reaction.
Wear nitrile gloves and eye protection when handling. Avoid breathing mist and wash hands after use. In case of skin contact, wash with plenty of water; seek medical advice if irritation or rash occurs. Refer to the current Safety Data Sheet (SDS) for full first‑aid, spillage and disposal guidance.

For technical support, bulk supply or private‑label enquiries, please contact the Innovation Chem technical service team.

Buying in bulk

Pack sizes200 litre drum, 1000 litre IBC
Colour and scentYour choice at no extra cost
Lead timeMade to order in 14 days
DocumentsSafety Data Sheet and CLP label supplied
Made inUnited Kingdom

Want it under your own label?

This formula is also available filled into 500ml to 25 litre packs with your branding.

Private label this product →

Fallout Remover in bulk: common questions

Can I choose the colour and scent?

Yes. Pick from our stocked dyes and from mango, bubblegum, cherry, watermelon or lemon. Leave both on Standard and we make it to our usual specification.

How long does delivery take?

Bulk products are made to order. Typical lead time is 14 days, delivered on a pallet to UK mainland addresses.

How does 4 for 3 work?

Add any four 200 litre drums to your basket, in any mix of products, and the cheapest one is free.

Do you supply a Safety Data Sheet?

Yes. A Safety Data Sheet and CLP compliant label are supplied with every order at no extra cost.

Can I get a sample first?

Yes. Ask for a sample pack and the cost is credited against your first drum or IBC.

Innovation Chem

Fallout Remover

Size
Regular price £31.44

Colour‑Changing Fallout Remover; Reactive Iron Decontamination Gel

Our Colour‑Changing Fallout Remover targets and dissolves embedded ferrous particles (brake dust, rail dust, industrial fallout) on paintwork, wheels and glass. The reactive sulfur‑based chemistry converts iron contamination into a water‑soluble complex, turning the product a vivid purple as it works, a clear visual cue that the surface is ready to rinse.

Performance Highlights

Attribute Benefit
Active colour‑change indicator Turns clear to deep purple on contact with iron, showing exactly when decontamination is complete.
pH‑balanced (4 – 5) Acid‑free and safe on clear‑coat, alloys, plastics and glass when used as directed.
Low‑mist, clinging formula Stays where you spray, ideal for vertical panels and intricate wheel designs.
Odour‑controlled Reduced sulfur odour versus conventional thioglycolate systems, making workshop use more pleasant.
Non‑corrosive to metals (finished surfaces) Optimised inhibitor package prevents flash‑rusting on bare steel rotors.

Typical Physical Data*

Appearance Clear to slightly hazy colourless liquid
Odour Pungent (low‑sulfur)
pH (20 °C) 4.3 – 5.5
Density Approx. 1.06 g mL‑1
Transport classification Not regulated

*Values are typical and may vary within normal manufacturing tolerances.

Application Guidelines

  1. Pre‑clean Wash loose dirt from the surface; work on a cool panel out of direct sunlight.
  2. Apply Spray evenly over the area; product will begin to react within 15–30 seconds.
  3. Dwell Allow 2–5 minutes for full colour change. Do not let the product dry.
  4. Agitate (optional) Use a soft detailing brush on heavily contaminated wheels.
  5. Rinse  Thoroughly pressure‑rinse to remove all residue, then proceed with finishing steps.

Packaging & Storage

Supplied in 1 L, 5 L, 25 L, 200 L and 1 000 L IBC containers.
Store sealed at 5–30 °C out of direct sunlight. Shelf life: 24 months from manufacture date.

Safety & Regulatory

Classified under UK‑CLP as Acute Toxicity 4 (H302)  harmful if swallowed and Skin Sensitiser 1A (H317)  may cause an allergic skin reaction.
Wear nitrile gloves and eye protection when handling. Avoid breathing mist and wash hands after use. In case of skin contact, wash with plenty of water; seek medical advice if irritation or rash occurs. Refer to the current Safety Data Sheet (SDS) for full first‑aid, spillage and disposal guidance.

For technical support, bulk supply or private‑label enquiries, please contact the Innovation Chem technical service team.