Fabric And Convertible Hood Sealant

Bulk supply

Fabric And Convertible Hood Sealant

£1,153.52

4 for 3 on 200L drums

Your basket is empty

  • Made to order in 14 days
  • Pallet delivery to UK mainland, price shown in your basket
  • Safety Data Sheet and CLP label included

About this product

Fabric & Convertible Hood Sealant — Long‑Lasting Hydrophobic Protection

Our Fabric & Convertible Hood Sealant (trade name “HydroGuard”) is a water‑borne fluorine‑free protector developed to repel rain, road grime and UV fallout on canvas, mohair and textile tops. The polymer matrix forms an invisible, breathable barrier that restores factory‑level water beading while resisting mould growth and colour fade.

Performance Highlights

Attribute Benefit
Advanced hydrophobic polymer Creates a durable water‑shedding layer that lasts up to 12 months per application.
UV & contamination shield Helps prevent photo‑bleaching, mildew staining and embedded road film.
Vapour‑permeable membrane Allows the fabric to “breathe”, avoiding trapped moisture that can cause delamination.
Neutral pH (4–6) Safe on natural and synthetic convertible fabrics with zero chalking or whitening.
Zero VOC / non‑flammable Not classified as hazardous for transport or storage; garage‑friendly.

Typical Physical Data*

Appearance Milky, opaque liquid — light blue tint
Odour Virtually odourless
pH (20 °C) 4.0 – 6.0
Relative density ≈ 1.00 g cm‑3
Solubility Miscible with water
Transport classification Not regulated

*Typical values; subject to normal manufacturing tolerances.

Application Guidelines

  1. Preparation — Clean the fabric surface thoroughly and allow to dry fully.
  2. Apply — Mist the product evenly onto the fabric at 15–20 cm distance until saturation. Work in sections.
  3. Level — Use a clean foam or microfiber applicator to spread and ensure uniform coverage.
  4. Cure — Allow a minimum of 4 hours at 15–25 °C before exposing to moisture. Full hydrophobic performance develops after 24 hours.
  5. Maintenance — Re‑apply when water beads begin to diminish (typically every 9–12 months).

Packaging & Storage

Available in 500 mL trigger spray, 1 L refill, 5 L, 25 L and 200 L UN‑approved HDPE containers.
Store sealed at 5–30 °C out of direct sunlight. Shelf life: 24 months from manufacture date.

Safety & Regulatory

The product is not classified as hazardous under UK‑CLP. Basic PPE (gloves, eye protection) is recommended during application. Consult the current Safety Data Sheet (SDS) for detailed handling and first‑aid information. Dispose of rinse water in accordance with local regulations.

For technical support, bulk supply or private‑label enquiries, please contact the Innovation Chem technical service team.

Buying in bulk

Pack sizes200 litre drum, 1000 litre IBC
Colour and scentYour choice at no extra cost
Lead timeMade to order in 14 days
DocumentsSafety Data Sheet and CLP label supplied
Made inUnited Kingdom

Want it under your own label?

This formula is also available filled into 500ml to 25 litre packs with your branding.

Private label this product →

Fabric And Convertible Hood Sealant in bulk: common questions

Can I choose the colour and scent?

Yes. Pick from our stocked dyes and from mango, bubblegum, cherry, watermelon or lemon. Leave both on Standard and we make it to our usual specification.

How long does delivery take?

Bulk products are made to order. Typical lead time is 14 days, delivered on a pallet to UK mainland addresses.

How does 4 for 3 work?

Add any four 200 litre drums to your basket, in any mix of products, and the cheapest one is free.

Do you supply a Safety Data Sheet?

Yes. A Safety Data Sheet and CLP compliant label are supplied with every order at no extra cost.

Can I get a sample first?

Yes. Ask for a sample pack and the cost is credited against your first drum or IBC.

Innovation Chem

Fabric And Convertible Hood Sealant

Size
Regular price £24.68

Fabric & Convertible Hood Sealant — Long‑Lasting Hydrophobic Protection

Our Fabric & Convertible Hood Sealant (trade name “HydroGuard”) is a water‑borne fluorine‑free protector developed to repel rain, road grime and UV fallout on canvas, mohair and textile tops. The polymer matrix forms an invisible, breathable barrier that restores factory‑level water beading while resisting mould growth and colour fade.

Performance Highlights

Attribute Benefit
Advanced hydrophobic polymer Creates a durable water‑shedding layer that lasts up to 12 months per application.
UV & contamination shield Helps prevent photo‑bleaching, mildew staining and embedded road film.
Vapour‑permeable membrane Allows the fabric to “breathe”, avoiding trapped moisture that can cause delamination.
Neutral pH (4–6) Safe on natural and synthetic convertible fabrics with zero chalking or whitening.
Zero VOC / non‑flammable Not classified as hazardous for transport or storage; garage‑friendly.

Typical Physical Data*

Appearance Milky, opaque liquid — light blue tint
Odour Virtually odourless
pH (20 °C) 4.0 – 6.0
Relative density ≈ 1.00 g cm‑3
Solubility Miscible with water
Transport classification Not regulated

*Typical values; subject to normal manufacturing tolerances.

Application Guidelines

  1. Preparation — Clean the fabric surface thoroughly and allow to dry fully.
  2. Apply — Mist the product evenly onto the fabric at 15–20 cm distance until saturation. Work in sections.
  3. Level — Use a clean foam or microfiber applicator to spread and ensure uniform coverage.
  4. Cure — Allow a minimum of 4 hours at 15–25 °C before exposing to moisture. Full hydrophobic performance develops after 24 hours.
  5. Maintenance — Re‑apply when water beads begin to diminish (typically every 9–12 months).

Packaging & Storage

Available in 500 mL trigger spray, 1 L refill, 5 L, 25 L and 200 L UN‑approved HDPE containers.
Store sealed at 5–30 °C out of direct sunlight. Shelf life: 24 months from manufacture date.

Safety & Regulatory

The product is not classified as hazardous under UK‑CLP. Basic PPE (gloves, eye protection) is recommended during application. Consult the current Safety Data Sheet (SDS) for detailed handling and first‑aid information. Dispose of rinse water in accordance with local regulations.

For technical support, bulk supply or private‑label enquiries, please contact the Innovation Chem technical service team.